1. Exhaust system
  2. Engine tuning
  3. Accessories
  4. Suspension
  5. Aerodynamics
  6. Interior
    • KW Coilover spring kits
    • KW
    • The KW coilover spring kit is used for lowering the vehicle in combination with the serial dampers, even when electronic damper control is installed. This lowering solution from KW optimises the dynamic performance and the steering behaviour without the electronic damper control deactivated. For this solution vehicle specific adjustable spring seats with adjusted KW lowering springs and the matching elastomer as well as the dust cover system will be used. This complete conversion allows an individual adjustable lowering solution.

      Individual height adjustability of the serial suspension kit
      Serial suspension system – also with electronic damper control – stays active
      Improved optic and vehicle dynamics
      Optimal performance
      Better steering behaviour

    • KW HLS (Hydraulic Lift System)
    • KW
    • Helping lowered vehicles to avoid road clearance difficulties

      The HLS provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. KW HLS is available as vehicle specific solution or individual conversion kit depending on the car model.

      HLS is available in two different versions: HLS 2 which is fitted to the front axle and HLS 4 which can be attached to the front and rear axle and allows lifting the entire vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. The advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder unit (resulting in no unwanted additional suspension movement) while driving.
      Allows cars with low ground clearance to clear obstacles more easily
      Available as complete kit including KW coilover kit or as conversion kit
      Can be activated from inside the vehicle via a LED position control switch or
      by an optional remote, thereby eliminating any need for interior wiring.
      Can be activated while driving (up to 80 km/h)
      Fast lifting – maximum lift occurs within 4-5 seconds when using HLS 2
      High-quality cylinder unit with durable aluminium construction
      Sealed unit for corrosion and dirt resistance
      Depending on the car type and model, KW HLS is either available as a vehicle-specific solution or as a conversion kit for KW or OEM coilover kits existing of springs, adaptions, hydraulic cylinder and control unit.

    • KW DDC coilover kits
    • KW
    • With electronic damping control

      With the new Dynamic Damping Control, DDC, KW has designed a new coilover suspension, which uses the original 3-way button to adjust the damping. KW combines the individual height adjustability of the coilover suspension with the adaptive OEM damping control.

      The driver can choose between 3 modes: “Comfort” for bad road conditions or just a relax ride, “Normal” for sporty daily use as the best compromise between performance and ride comfort or “Sport” for best handling and response.

      There is no additional assembly effort.

      The kit retains all advantages of a typical KW coilover kit, means:

      The lowering can be adjusted in between the TÜV certificated adjusting range. The stainless steel technology “inox-line” guarantees that all parts remain movable, even under heavy use and salty winter time.

      The new dynamic damping system, DDC, is available as a complete plug and play solution for the VW Golf MK VI, Passat 3C and the Scirocco, equipped with OE damping control.

    • KW clubsport – Performance for racetrack & road
    • KW
    • KW Clubsport was developed for customers, who demand a better handling car when participating in track day events, but also require an offi cial road approval to use their car every day. The setup was specifi cally designed for the Nordschleife using track day tyres. By using the optional available adjustable top mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow individual setup adjustments according to the vehicle load, tyre characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track.

      KW Clubsport suspension kits are independently adjustable in compression and rebound forces and include high performance racing springs. Racing top mounts are optionally available for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times.
      Height adjustable coilovers
      Performance setup for the racetrack
      Dampers in compression & rebound forces independently adjustable
      Use of high performance linear race springs/li>
      In stainless steel technology inox-line
      Additional available with racing top mounts
      TÜV approval possible depending on the specification
      (see references)

    • KW street comfort
    • KW
    • Your sport suspension kit is too hard for you? Do you want a sportive,dynamic suspension with remaining comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads.

      KW street comfort – The most individual sport suspension with maximum comfort

      With the individual height adjustable KW street comfort coilover kit a lowering of 10-40 mm can be realised, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tyres. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort.
      Maximum driving comfort for a perfect performance and more driving pleasure
      Guarantees more comfort, flexibility and sportive as regular OE sport suspensions
      Comfortable adjustment
      Better handling due to less body roll
      With TÜV tested adjustment range for a individual lowering of 10 to 40 mm
      Trapezoid thread for a easy height adjustability
      High quality damper components for a long durability
      Adjustable rebound damping
      Complete delivery content inclusive detailed documentation for a easy use

    • KW Variant 3 inox-line – Perfect Street Performance
    • KW
    • State-of-the-art technology from motor sports for more performance on the road. The separate and independently adjustable rebound- and compression damping allows for an individual suspension setup for different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.
      Damping technology with individually adjustable rebound- and compression technology
      inox-line* stainless steel technology
      Individually height adjustable
      Adjustment parameters approved by the German Technical Control Board (TÜV)
      High-quality components for long durability
      Infinitely variable rebound damping adjustment
      14-way adjustable compression damping
      Unique, individually working damping force adjustment
      Comprehensive documentation for easy use

    • KW Variant 2 inox-line – Perfect Street Performance
    • KW
    • Sporty Handling with adjustable rebound damping

      The system intended for the experienced driver who does not only wish to determine the individual lowering of his vehicle, but also wishes to carry out setup adjustments. The adjustable rebound damper allows adjusting the pitch and roll behaviour of the vehicle and therefore the driving pleasure can be adapted to the own requirements.
      Damping technology with individually adjustable rebound
      Available in two different housing designs, “inox-line” and “basic”
      Individually height adjustable
      TÜV-tested adjustment parameters
      High-quality components for long life
      Comprehensive documentation for ease of use
      Infinitely adjustable rebound damping

    • KW Variant 1 inox-line – Perfect Street Performance
    • KW
    • Sporty Handling with factory pre-set damping
      The ideal systems for customers wishing to rely on the experience of our engineers to set the damper setting, yet determine their own degree of lowering. In extensive driving tests our engineers have set the dampers for the best balance between sporty driving, comfort and safety. The user is then free to decide the best height setting for their use and preference.
      Optimally pre-set
      Sporty harmonious damping technology
      Stainless steel technology “inox-line”*
      Individually height-adjustable
      Lowering range approved by the German Technical Control Board (TÜV)
      Fully finished complete solutions
      High-quality component parts for long durability
      Comprehensive documentation for easy use